Most people think using an exhaust fan will remove steam.
They remove most surface.
Best way to ensure all moisture has gone, is open windows for a few hours.
This will allow the bathroom to fully clear.
Upon arrival back, grab the items mentioned yesterday.
For safety, please wear disposable gloves.
I start with vanity mirror.
Then use anti bacterial wipes, wiping down the surfaces, including taps/faucet/s & outer side of vanity, discard.
Grab a blue cloth & wipe over, removing residue. Then grab a microfibre and remove streaks, this should shine them.
Next, if you have a bath, grab an antibacterial wipe & wipe the taps/faucet/s, then wipe over the bath. Continue until completely wiped over, use as many wipes as needed. Grab blue wipes, wipe those surfaces, microfibre, same.
Then moving onto shower, use 1 of these, below.
Wipe over shower screens, you may need to use several, depending on how much residue there is, discard wipe/s. Grab blue cloths & wipe over. Then grab a microfibre, this should give a streak free clean.
Grab an antibacterial wipe, & wipe taps/faucet/Shower Head. Blue cloths & microfibre again.
Grab spray mop, place a red microfibre pad. In the water bottle, 3/4 fill with clean, filtered water, then fill with disinfectant. Place in holder, then mop bathroom.
W/C: Grab toilet brush & clean inside. Then pour some cleaner in bowl. Then use an antibacterial wipe, wipe top of seat, then cistern, under seat, outside of bowl.
Wipe over with a blue cloth only, discard.
Mop W/C, ensure a red pad.
Once floors dry, you can steam mop both areas. Please don’t use carpet glider, (triangle plastic), as it will scratch the tiles.
Once completed, wash cloths, spray mop pads & steam mop pads. I usually add 2 capfuls of disinfectant.